类型：回转式系列
Type: Live centers series
负荷：中
Duty: Medium

适 用：CNC数控数控车、高数控数控车和其他数控。 Application CNC lathe, high speed lathe and other lathe 用 途：可用小经轴心长宽高300mm元中铣削生产制造。 Working Usage Applicable for small diameter and length less than 300mm medium turning process 结 构：採用止推滚针轴套、左右侧滚针滚针轴套，两大作为支撑力点层次性设计制作製成。 Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point 精准扶贫度：0.002mm以里 TIR: Less than 0.002mm

在线检测高端的尖部闪动精确时，需在高端顶紧铸件的的状态下参与打表。 Inspecting the run out accuracy of the cen🐓ter tip must be under the status of holding the workbar tightly.

产品规格 / Specification   方/ UNIT：mm

类型/外层面积 Model/Spec	A	B	C	D	D1	d	G	L	Ø	轴承套最高的人转数 Max. RPM	轴承套径向力 （载重量） Max. radial load	轴套支承力 （扭力） Max. axial thrust force
F363-2	40	87	6	32	20	8	17.780（MT2)	156	60゜	4,000rpm	400kg	1,000kg
F363-3	46	101	8	41	25	10	23.825（MT3)	188	60゜	3,500rpm	1,200kg	1,500kg
F363-4	55	114	9	48	32	12	31.267（MT4)	222	60゜	3,500rpm	1,400kg	1,900kg
F363-5	75	155	9	63	45	14	44.399（MT5)	290	60゜	3,000rpm	2,200kg	2,500kg

备注：
本顶针指定使用SKF-LGMT2专用润滑油，请勿使用其他不同成分之润滑油。
产品型号中有“A”的表示顶针有附螺帽
径向力数据参考：加工件重量+车削力量
配件中的顶针子，型号有“A”的为加长型顶针子。
轴向力据参考：尾座油压压力数据
非标需求可定制
保留技术更改的权利

Remarks
1,For the lubricating oil,SKF-LGMT2 is designated,others aren't allowed
2,if "A" is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if "A" is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.

陪件商品详情页/Accessories Page
新锐的技术指导思想与运用代表/Center technical user manual