类型:回转式系列
Type: Live centers series
负荷:重
Duty: Heavy
♈ 在线检测权威的尖部上下跳动精密度时,必须要在权威顶紧镗孔的形态下通过打表。 Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
技术参数 / Specification 公司的/ UNIT:mm
结构类型/表层面积
Model/Spec |
A | B | C | D | D1 | G | L | Ø | 轴套高达转数 Max. RPM |
滚动轴承径向力
(载货量)
Max. radial load |
轴套支承力
(扭力)
Max. axial thrust force |
---|---|---|---|---|---|---|---|---|---|---|---|
SC-60-H-4 | 54 | 97 | 9 | 78 | 34.8 | 31.267(MT4) | 205 | 60゜ | 5,000rpm | 1,900kg | 1,600kg |
SC-60-H-5 | 62 | 109 | 9 | 83 | 44.8 | 44.399(MT5) | 244 | 60゜ | 5,000rpm | 3,000kg | 2,200kg |
SC-60-H-6A | 70 | 152 | 10 | 108 | 59.9 | 63.348(MT6) | 342 | 60゜ | 3,000rpm | 5,000kg | 3,500kg |
备注:
本顶针指定使用SKF-LGMT2专用润滑油,请勿使用其他不同成分之润滑油。
产品型号中有“A”的表示顶针有附螺帽
径向力数据参考:加工件重量+车削力量
配件中的顶针子,型号有“A”的为加长型顶针子。
轴向力据参考:尾座油压压力数据
非标需求可定制
保留技术更改的权利
Remarks
1,For the lubricating oil,SKF-LGMT2 is designated,others aren't allowed
2,if "A" is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if "A" is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.
下一条:JK-562强力回转顶针
上一条:NCH-62精密型高速回转顶针