品牌/Brand：NTH
选取斜柱后拉式格局，控制精程度高，夹紧力大。 三爪卡盘做工作时，由斜柱的后拉将工件表面拉向定位功能面再完成夹紧，最后以确保了径向长度和径向长度的计算精度。 本三爪卡盘时候于夹持弧型类件，特别的是对纵向度美好行度有请求的类件。 注：此型卡爪祇能做外径夹持，夹持尺寸图调换时，须换软卡爪。 It‵s adopted the structure of slanting post with pulling back type.high precision,strong clamping force. The slanting post of the chuck pull the workpiece back to position place,and then clamping it,therefore,the chuck can ensure the accuracy of radial size and axial size. This chuck is applicable for clamping the special shape workpiece.especially,itˊs applicable for the workpiece which need high precision requirements on squareness and parallelism. Re:This chuck is only for clamping out diameter,the soft jaws need chanqing when the clamping size is changed.
|
规格
Spec 型号 Model |
楔心行程 Plunger stroke mm |
爪行程直径 Jaw stroke Dia. mm |
容许油压缸推力 Max.D.B.Pull KN(kgf) |
最大夹持力 Max clamping force KN(kgf) |
|---|---|---|---|---|
| DPT-06A5 | 15 | 7.8 | 6(610) | 16.7(1700) |
| DPT-08A5 | 20 | 10.3 | 10.7(1090) | 30(3060) |
| DPT-08A6 | 20 | 10.3 | 10.7(1090) | 30(3060) |
| DPT-10A6 | 20 | 10.3 | 14(1430) | 40(4080) |
|
DPT-10A8 |
20 | 10.3 | 14(1430) | 40(4080) |
|
规格
Spec 型号 Model |
最高转速 Max RPM |
最大使用压力 Max.pressure Mpa(Kgf/cm²) |
惯性矩 I kg*m² |
重量 Weight Kg |
|---|---|---|---|---|
|
DPT-06A5 |
3500 | 1.7(17) | 0.06 | 14 |
| DPT-08A5 | 3000 | 1.5(15) | 0.14 | 26 |
| DPT-08A5 | 3000 | 1.5(15) | 0.14 | 24 |
|
DPT-10A6 |
2500 | 1.3(13) | 0.36 | 50 |
|
DPT-10A8 |
2500 | 1.3(13) | 0.36 | 49 |
|
规格
Spec 型号 Model |
A | B | C(H6) | D | D1 | E | E1 | F | G max | G min | H | J | K | L1 | L2 Min |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPT-06A5 | 165 | 88 | 140 | 104.8 | 82.56 | 5 | 15 | 35 | 30 | 15 | 35 | 32 | 55 | 13 | 8 |
| DPT-08A5 | 210 | 100 | 170 | 133.4 | 82.56 | 5 | 23 | 45 | 27 | 7 | 38 | 37 | 75 | 17 | 9 |
| DPT-08A5 | 210 | 100 | 170 | 133.4 | 106.38 | 5 | 17 | 45 | 27 | 7 | 38 | 37 | 75 | 17 | 9 |
| DPT-10A6 | 254 | 110 | 220 | 171.4 | 106.38 | 5 | 25 | 55 | 31 | 11 | 41 | 48 | 85 | 19 | 9 |
|
DPT-10A8 |
254 | 110 | 220 | 171.4 | 139.72 | 5 | 18 | 55 | 31 | 11 | 41 | 48 | 85 | 19 | 9 |
|
规格
Spec 型号 Model |
M1 | M2 | M3 | M4 | M5 | M6 | N | P | R | S | T | X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPT-06A5 | M16 | 6-M10 | 4-M6 | 4-M6 | 3-M5 | 6-M10 | 73 | 23 | 23 | 35 | 35 | 45 |
| DPT-08A5 | M20 | 6-M12 | 6-M10 | 4-M10 | 3-M6 | 6-M12 | 82 | 26 | 26 | 40 | 50 | 60 |
| DPT-08A5 | M20 | 6-M12 | 4-M6 | 4-M10 | 3-M6 | 6-M12 | 82 | 26 | 26 | 40 | 50 | 60 |
| DPT-10A6 | M24 | 6-M16 | 6-M12 | 4-M10 | 3-M6 | 6-M14 | 100 | 32 | 32 | 50 | 55 | 70 |
|
DPT-10A8 |
M24 | 6-M16 | 4-M8 | 4-M10 | 3-M6 | 6-M14 | 100 | 32 | 32 | 50 | 55 | 70 |
下一条：DPR 3爪后拉式油压卡盘
